This article needs additional citations for verification. (January 2016)
Night photography (also called nighttime photography) refers to the activity of capturing images outdoors at night, between dusk and dawn. Night photographers generally have a choice between using artificial lighting and using a long exposure, exposing the shot for seconds, minutes, or even hours in order to give photosensitive film or an image sensor enough time to capture a desirable image. With the progress of high-speed films, higher-sensitivity digital sensors, wide- aperture lenses, and the ever-greater power of urban lights, night photography is increasingly possible using available light.
The very long exposure times of early photographic processes didn't mean people didn't try to take photographs at night from quite early on. The development of mechanical clock drives meant cameras attached to telescopes could eventually capture successful images of celestial objects.
The first-known attempt at astronomical photography was by Louis Jacques Mandé Daguerre, inventor of the daguerreotype process which bears his name, who attempted in 1839 to photograph the Moon. Tracking errors in guiding the telescope during the long exposure meant the photograph came out as an indistinct fuzzy spot.
John William Draper, New York University Professor of Chemistry, physician and scientific experimenter managed to make the first successful photograph of the moon a year later on March 23, 1840, taking a 20-minute-long daguerreotype image using a 5-inch (13 cm) reflecting telescope.
The increasing use of street lighting throughout the second half of the 19th century meant it was possible to capture nighttime scenes despite the long exposure times of the equipment of the period.
Developments in illumination, especially through the use of electricity, coincided with the shortening of exposure times. By the beginning of the 20th century newspapers and journals often showed night time views usually of illuminated urban streets or places of amusement such as Coney Island.
In the early 1900s, a few notable photographers, Alfred Stieglitz and William Fraser, began working at night. The first known female night photographer is Jessie Tarbox Beals.[ citation needed] The first photographers known to have produced large bodies of work at night were Brassai and Bill Brandt. In 1932, Brassai published Paris de Nuit, a book of black-and-white photographs of the streets of Paris at night. During World War II, British photographer Brandt took advantage of the black-out conditions to photograph the streets of London by moonlight.
Photography at night found several new practitioners in the 1970s, beginning with the black and white photographs that Richard Misrach made of desert flora (1975–77). Joel Meyerowitz made luminous large format color studies of Cape Cod at nightfall which were published in his influential book, Cape Light (1979). Jan Staller’s twilight color photographs (1977–84) of abandoned and derelict parts of New York City captured uncanny visions of the urban landscape lit by the glare of sodium vapor street lights.
By the 1990s, British-born photographer Michael Kenna had established himself as the most commercially successful night photographer. His black-and-white landscapes were most often set between dusk and dawn in locations that included San Francisco, Japan, France, and England. Some of his most memorable projects depict the Ford Motor Company's Rouge River plant, the Ratcliffe-on-Soar Power Station in the East Midlands in England, and many of the Nazi concentration camps scattered across Germany, France, Belgium, Poland and Austria.
During the beginning of the 21st century, the popularity of digital cameras made it much easier for beginning photographers to understand the complexities of photographing at night. Today, there are hundreds of websites dedicated to night photography.
Common subjects photographed at night or in low light include the following:
The following techniques and equipment are generally used in night photography.
This technique is often combined with using coloured gels in front of the flash unit to provide different colours in order to illuminate the subject in different ways. It is also common to flash the unit several times during the exposure while swapping the colours of the gels around to mix colours on the final photo. This requires some skill and a lot of imagination since it is not possible to see how the effects will turn out until the exposure is complete. By using this technique, the photographer can illuminate specific parts of the subject in different colours creating shadows in ways which would not normally be possible.
When the correct equipment is used such as a tripod and shutter release cable, the photographer can use long exposures to photograph images of light. For example, when photographing a subject try switching the exposure to manual and selecting the bulb setting on the camera. Once this is achieved trip the shutter and photograph your subject moving a flashlight or any small light in various patterns. Experiment with this outcome to produce artistic results. Multiple attempts are usually needed to produce the desired result.
Advanced imaging sensors along with sophisticated software processing make low-light photography with High ISO possible without a tripod or long exposure. Digital SLRs have high end APS-C and full-frame digital SLR sensors which have a very large dynamic range and high sensitivity, making them capable of night photography. These large sensor cameras are able to collect more light than smaller sensors due to the size of the imaging area. Combined with large aperture lenses and other equipment and techniques, this allows for photography with high quality in very dark locations.
BSI-CMOS is another type of CMOS sensor that is gradually entering the compact camera segment which is superior to the traditional CCD sensors. Cameras with small sensors such as: Sony Cyber-shot DSC-RX100, Nikon 1 J2 and Canon PowerShot G1X give good images up to ISO 400. 
Moonlight photography (capturing scenes on Earth illuminated by moonlight) greatly differs from lunar photography (capturing scenes on the Moon illuminated by direct sunlight). The Moon has an effective albedo of approximately 0.12, comparable to worn asphalt concrete. Since the Moon is essentially a dark body in direct sunlight, photographing its surface needs an exposure comparable to what a photographer would use for ordinary, mid-brightness surfaces (buildings, trees, faces, etc.) with an overcast sky.
The sunlight reflected from the full Moon onto Earth is about 1/250,000 of the brightness of direct sunlight in daytime. Since log2(250,000) = 17.93..., full-moon photography requires 18 stops more exposure than sunlight photography, for which the sunny 16 rule is a commonly used guideline. 
Imagine a directly sunlit exposure of 1/100 second at ISO 100 and f/16 (the baseline of sunny 16). Adding 18 stops to convert from the Sun to the Moon could result in a shutter speed of 8 seconds at ISO 400 and f/2 (+10 stops of time, +2 stops of ISO, +6 stops of aperture). However, on most chemical film, such an exposure would turn out too dark. This is because film does not expose in linear proportion to the light it absorbs, an effect called reciprocity failure. At light levels as dim as moonlight, it needs more light than a linear extrapolation of daylight values would suggest.
In practice, moonlight photography often uses exposures of several minutes. Digital cameras generally have less reciprocity failure, but do show image noise in low light.
Clun lake and castle by moonlight, 1920s
São Paulo, Brazil
Chay kenar Boulevard in Tabriz, Iran
An exposure blended night image of the Sydney Opera House
Four image panorama of Washington Park, 30 second exposures each.
An exposure blended image consisting of 30, 2.5 and 10 second exposures
This section includes significant night photographers who have published books dedicated to night photography, and some of their selected works.